Water-Based Products

De-Solv-it® Aqueous Degreaser (DSI 3000)


Diluted to suit the cleaning application, effective up to 20:1 dilution, but can also be used neat. Apply liberally to the surface to be cleaned and leave to act for 2-3 minutes or longer for severe contaminations (apply agitation where necessary). Once the surface is clean simply rinse off with water.

For heated systems such as ultrasonic tanks the optimum working temperature is 50°C.


Highly concentrated emulsifying citrus degreaser formulated to combine the cutting power of

solvents with the lifting power of surfactants to remove oils, greases, inks, polishing compounds and lapping slurry. For use in manual & machine cleaning applications.

AQUASOLV Spray Wash Cleaner-VCI (Aqua 10VCI)


Dilute with water, ratio will vary according to levels of contamination from 5-20% for heavy soiling. Operating temperature between 40°C and 70°C. Components must be allowed to dry before storing to prevent VCI protection being removed.


For use in high pressure spray equipment. Designed to remove oil, grease and swarf from steel and cast iron parts in manufacturing, assembly, pre-paint & refurbishment operations.

Contains an added Vapour Corrosion Inhibitor (VCI) that protects ferrous components for up to 3 months in good storage conditions.

Testing/control of cleaner concentration:

10ml of 10% of Spray Wash Cleaner - VCI vs. 0.1 M Hydrochloric acid using phenolphthalein indicator gives a titration of 4.0 ml.

Testing VCI Strength:

VCI strength determined using a refractometer. A few drops placed on the refractometer prism and the value determined on a graph available by request.